GE RFX Package

Almost New RFX Suite with New X-ray Generator

Huestis Medical’s almost new GE RFX systems begin with a complete tear-down.  All mechanical and electronic systems are then functionally and cosmetically inspected, evaluated and remanufactured to exacting standards.  After a detailed three-step paint process, each system is prestaged for operational compatibility and calibration to OEM specifications.

Bundled with a NEW high frequency X-ray generator from CPI and an array of powerful imaging options, this versatile suite offers excellent imaging at an affordable price.

Features

  • Table Features
  • Quiet angulation drive with soft start and stop feature.
  • Tabletop longitudinal drive interlocked with angulation drive to prevent collision with floor and ceiling.
  • Tabletop and footrest extend downward toward floor with table vertical.
  • Range of Motion
  • 73.5” (187cm) fluoroscopic beam center-to-floor dimensions when table is vertical for cervical esophagus coverage on 6'8” (2.0m) tall patients.
  • 11” (28cm) transverse fluoroscopic carriage travel.
  • 20” (50cm) maximum caliper opening between bottom of spotfilmer or pedestal and tabletop, 19” (48cm) maximum with 4-way flat top.
  • Structural plastic front and end panels shaped to eliminate sharp edges and barium traps while resisting strains, dents and corrosion.
  • Undertable X-ray tube equipped with a forced oil/air heat exchanger for improved cooling.
  • Convenient Operator Features
  • All table controls needed by technologist are located conveniently on table.
  • Interlocked patient step eliminates need for accessory foot stool.
  • Patient hand grips may be quickly attached at any point on front or rear of tabletop.
  • Myelographic Stop
  • When automatic stop at horizontal is defeated for myelography and other needle intensive procedures, the compression cone drive is disabled.
  • Efficient Bucky Design
  • Entrance type, three field Quantamat Ionization Bucky Detector designed for minimum object film distance.
  • Grid lines virtually invisible at 8 m/sec with 103-line grid.
  • RFX 88 Spotfilm Device
  • Accepts 9.5” x 9.5” (24 x 24 cm) cassette sizes for operating simplicity and rapid access from fluoro mode.
  • Effort sensing, longitudinal power assist control in positioning handle.
  • 1-on-1, 2-on-1 longitudinal, 2-on-1 transverse and 4-on-1 formats.
  • Spotfilm access time from fluoro mode is approximately 0.75 seconds.
  • Rapid-sequence spotfilms are accomplished with approximately 0.5 seconds between exposures.
  • Table Bucky “center-finder” feature.
  • 88/35 or DSP also available.
  • Included Packaged Components
  • Almost New GE RFX table and GE RFX 88 Spotfilm Device.
  • New CPI high-frequency generator.
  • Almost New GE XT Suspension and GE Sentry III X-ray Collimator.
  • 9", 6" or 4.5" Image Intensifier (12", 14" and 16" also available).

Close Window