Jacket Puller/Choppers

JPC-1000 & JPC-3000

Our puller/chopper pulls the jacket evenly and chops it into short lengths for disposal or reprocessing.  The chopper cuts the jacket in 8" x 12" lengths (depending on line speed) for easy disposal or reclamation.  Many times a tote box is placed under the accessory to collect the scrap material.  The JPC-1000 puller/chopper is limited to a 1/4" conductor diameter because, as the jacket goes through the puller, it must be flattened and is limited to this width.  Max jacket thickness is 1/4" with a max line speed of 250 ft./min.  Jacket materials should be approved or tested by Huestis Industrial or an authorized agent prior to ordering.  Larger puller/choppers are available for our CJS-3000 and CJS-4000 and are quoted to your specific application.

Puller/Driver Nip Rolls

Our jacket puller/driver nip rolls supply the pulling force for the cable jacket puller accessory.  Our puller has its own separate variable speed DC drive and is used to assist in pulling the jacket away from the conductor or core.  The jacket puller is not designed to provide the stripping process, only the jacket pulling force.  The jacket puller is an optional accessory.